In Dc Machine The Number Of Slots Per Pole Usually Lies
Machine the number of brush arms is the number of poles. A) less than b) equal to c) greater than d) none of the above. The armature core of a DC generator or machine serves the following purposes. It houses the conductors in the slots. It provides an easy path for the magnetic flux. As the armature is a rotating part of the DC Generator or machine, the reversal of flux takes place in the core, hence hysteresis losses are produced. The other thing to be aware of is that the more poles (magnets) there are on a motor the more work the ESC has to do per revolution. ESCs have a max RPM (usually somewhere between 120kRPM and 240kRPM for a 2 pole motor) that they can support, so a low magnet count high RPM motor will be compatible with more ESCs.
The number of slots per pole per phase determines how the winding layout is arranged. It is also disclosing information about the winding factor and its harmonics.
If the number of slots/pole/phase is an integer, the winding is called integer-slot winding.
If the number of slots/pole/phase is fractional and superior to 1, the winding is called fractional-slot winding.
If the number of slots/pole/phase is fractional and inferior to 1, the winding is called concentrated winding.
Windings with the same number of slots/pole/phase $q$ have the same winding factor. Their winding layouts consist of the same basic sequence repeated by the number of winding symmetries (or machine periodicity).
Example:
10-pole 12-slot single-layer 3-phase winding: $q=frac{12}{10cdot 3}=frac{2}{5}$, fundamental winding factor: 0.966, one winding symmetry.
20-pole 24-slot single-layer 3-phase winding: $q=frac{24}{20cdot 3}=frac{2}{5}$, fundamental winding factor: 0.966, two winding symmetries.
The number of slots/pole/phase is also an indicator about what winding factor and winding-factor harmnoics one can expect.
Example 1:
The harmonic spectrum of the winding factor of 4-pole 3-phase integer-slot windings in Fig. 1 shows that an increasing number of slots/pole/phase (from $q=1$ for the 12-slot winding to $q=5$ for the 60-slot winding) leads to a steady decrease of the fundamental winding factor. However, since the coils are distributed over several slots per pole per phase, the back-EMF gets more sinusoidal. This fact is reflected in significantly reduced winding factor harmonics of order three and higher, cf. Fig. 1.
Fig. 1 Winding factor harmonics for 4-pole 3-phase integer-slot windings with different number of slots/pole/phase.
Example 2:
For concentrated windings, the fundamental winding factor increases and decreases as a function of the number of slots/pole/phase as shown in Fig. 2. The highest fundamental winding factors are found when the number of slots is closest to the number of poles, ie. $q0007pprox 1/3$.
Fig. 2 Fundamental winding factor for concentrated windings as a function of the number of slots/pole/phase [1].
References:
[1] Florence Meier, Permanent-Magnet Synchronous Machines with Non-Overlapping Concentrated Windings for Low-Speed Direct-Drive Applications, Phd Thesis, Royal Institute of Technology (KTH), July 2008
In Dc Machine The Number Of Slots Per Pole Usually Lies Across
Read about another glossary term